JET-E 3.5 is a Hi-Therm non-pressure instantaneous electric water heater rated at 3,5 kW for local warm-water supply under a sink or washbasin.
The JET-E series is designed for local hot-water supply in kitchens, washbasins, summer houses and utility zones. The heater activates by water flow and does not keep a permanent hot-water reserve, so electricity is used only while water is being drawn.
For correct operation, electrical line, water pressure and minimum water resistivity requirements must be followed. Installation should be carried out by a qualified specialist.
| Application | sink / washbasin, under-point installation |
| Heating power, W | 3500 |
| Supply voltage, V/Hz | 230/50 |
| Current, A | 15,2 |
| Activation water flow | 1,1 l/min |
| Dimensions, mm | 153x134x76 |
| Maximum inlet water pressure | 6,5 bar |
| Min. water resistivity at 15 °C | 1300 Ohm*cm |
| Min. power cable cross-section | 1,5 mm2 |
| Heater type | JET-E 3.5 |
| Production | Poland |
| Warranty | 1 year |
