PRODUCT CATALOG
pipes and fittings
Hi-therm PEXa2Gen pipe with oxygen barrier PEXa EVOH 16x2.0
На фото Hi-therm PEXa2Gen pipe with oxygen barrier PEXa EVOH 16x2.0 На фото Hi-therm PEXa2Gen pipe with oxygen barrier PEXa EVOH 16x2.0
  • На фото Hi-therm PEXa2Gen pipe with oxygen barrier PEXa EVOH 16x2.0
  • На фото Hi-therm PEXa2Gen pipe with oxygen barrier PEXa EVOH 16x2.0

Hi-therm PEXa2Gen pipe with oxygen barrier PEXa EVOH 16x2.0

SKU: PEXa2Gen240 / PEXa2Gen500

Hi-Therm PEXa2Gen PEXa EVOH 16x2.0 pipe is A three-layer PEXa pipe with EVOH oxygen barrier for underfloor and radiator heating systems.

The EVOH oxygen barrier reduces oxygen diffusion into the heating circuit, helping protect metal components from corrosion and extending system service life.

  • Size: 16.0 x 2.0 mm.
  • Material: PEXa, peroxide cross-linked polyethylene.
  • Oxygen barrier: EVOH, oxygen diffusion < 0.1 mg/dl.
  • Temperature: up to +95°C, low-temperature resistance down to -40°C.
  • Coil length: 240 m or 500 m.
  • Made in: Spain. Warranty - 10 years.
  • Molecular memory: helps the pipe recover shape after a kink when repaired according to the manufacturer recommendations.
Pipe and fitting specifications
Product type
Underfloor heating pipe
Material
PEXa, peroxide cross-linked polyethylene
Size / diameter
16.0 x 2.0 mm
Pressure / operating class
Class 1/10 bar, 2/10 bar, 4/10 bar, 5/8 bar
Reinforcement / barrier
EVOH oxygen barrier; oxygen diffusion < 0.1 mg/dl
Operating temperature
Up to +95 °C; cold resistance down to -40 °C
Application
Water underfloor heating and radiator heating systems
Standard
UNE EN ISO 15875
Country of manufacture
Spain
Warranty
10 years

Hi-Therm PEXa2Gen PEXa EVOH 16x2.0 pipe: specifications and installation

ParameterValue
Outside diameter / wall thickness16.0 mm / 2.0 mm
Pipe materialPEXa, peroxide cross-linked polyethylene
Structure3 layers: polyethylene / adhesive layer / EVOH
Oxygen barrierEVOH, oxygen diffusion < 0.1 mg/dl
Application classes1/10 bar, 2/10 bar, 4/10 bar, 5/8 bar
Temperature rangeup to +95°C; low-temperature resistance down to -40°C
Coil weight21.84 kg (240 m), 45.55 kg (500 m)
Coil length240 m or 500 m
StandardsISO 15875, DIN 4726
Made inSpain
Warranty10 years

Installation: installation should be carried out by qualified personnel at an ambient temperature of at least +10°C. Press fittings or compression fittings suitable for 2.0 mm wall thickness are recommended.

Before covering the underfloor heating circuit, hydraulic leak testing must be completed. During screed pouring, the pipe should remain under 0.3 MPa pressure; the minimum screed layer above the pipe is 3 cm.

Technical data is based on the Hi-Therm Pipe Spain 2025 catalog.

PEXa2Gen / PERT2Gen catalog
На фото Труба STABI PP-SDR 7,4 (S 3,2)
Труба STABI PP-SDR 7,4 (S 3,2)
/* Hi-Therm product card unification draft. Best placement: product template/footer after product..
Where to buy this model
Read more about model